Starbuck 'Anovos Utility Belt and Pouches' Details

Here are some detailed pictures and measurements of the utility belt by Anovos for those looking to make their own!

This is the double pouch, about 4in width, 6in height, and 1in depth.

The two small triangular pouches are about 3in width, 3.5-4in height, and a little over .5in depth.

The small odd shaped (almost square) pouch is about 3.5in width, 3in height, and 1 and 1/4in depth. I've also pictured the measurement from inside the pouch. The front flap has nothing under it.

The tallest skinny pouch is about 1 and 3/4in width, 6.5in height, and 1in depth.

The last pouch is about 2in width at its base, 5.5in height, and 1 and 1/4in depth.

This is the right side holster- about 12.5in height, 7.5in at the top and 3.5-4in at the base. About 1 and 1/4in depth at base of pocket and 1.5-2in at top of pocket (depending on how big the gun is that it's going to carry).

Lastly, the belt. A total of about 55in (I've got mine adjusted to 40in), it features a unique buckle with velcro ends to allow for size adjustments. This buckle does say 'cosplay use only' but you can flip it so that it doesn't show.

I hope this information was helpful!

Thanks for reading:)

{WarriorClassStudios}